![](https://yztekglobal.com/wp-content/uploads/2024/04/eAutOff-logo_工作區域-1-複本-300x82.png)
GAS COOKER BUILT-IN AUTOMATIC TIMER AND SHUT-OFF
![](https://yztekglobal.com/wp-content/uploads/2024/04/20240328-EA02-方形銘版.780-1024x844.png)
![](https://yztekglobal.com/wp-content/uploads/2024/04/2024產品型錄-EA02-EN-04-1024x530.png)
EA02 Product Introduction
▸Fire Detection Process:
Upon turning-on the gas cooker, the control base identifies the presence of fire through voltage detection and transmits a signal to the main unit. Subsequently, the main unit initiates the preset timer.
▸Flame-off Detection:
When the user turns off the flame manually, the controller sends a signal to turn-off the timer and enter into power-saving mode.
▸Scheduled flame-off control: When flame-on timing is due.The main unit sends a flame-off signal to the controller to disconnect the thermal couple circuit to cut-off gas and enter into power-saving mode.
The component controller is installed at the thermal couple and solenoid ends to improve the accuracy of the thermal couple voltage detection.
![](https://yztekglobal.com/wp-content/uploads/2024/04/2024產品型錄-EA02-EN-05.png)
Main body interface and dimension
![](https://yztekglobal.com/wp-content/uploads/2024/04/2024產品型錄-EA02-EN-06.png)
Product configuration
![](https://yztekglobal.com/wp-content/uploads/2024/04/2024產品型錄-EA02-EN-07.png)
Product specification
![](https://yztekglobal.com/wp-content/uploads/2024/04/2024產品型錄-EA02-EN-08.png)